7022-1-020201

350-6000 MHz Statistical RF Power Sensor

Measure and Maintain Your Most Complex Wireless Systems

7022-1-020201, RF Power Sensor is a rugged, easy to use field instrument that uses statistical sampling techniques. In modern communications, signal average power, although important is no longer a sufficient control variable. These communication signals often require more diagnostic measurements. In the statistical mode, the power sensor measures the percentage of time the signal exists at a specific peak-to-average ratio. In the time domain mode, the sensor adds a variety of functions similar to an oscilloscope to our standard suite of measurements.

The statistical power sensor can be used in all known communication formats and is able to accurately measure a wide range of RF measurements for non-periodic signals such as EVDO, UMTS, LTE, and HDTV. Like all Bird Sensors, its calibration is also traceable to NIST standards with no field calibration required.

Supported Modulations

Analog Cellular, Digital Cellular, 3G, 4G, Tetra, APCO/P25 Phase 1 & 2, DMR, MOTOTRBO, Trunking, CDMA, TDMA, WCDMA, GSM, Transportation, Tactical Military, Radar, Avionics, Marine, LMR, Analog Broadcast, Digital Broadcast, GSM, GPRS, EDGE, UMTS, HSDPA, Bluetooth, Fire, GPS, NPSPAC, Paging, Public Safety, Telematics, Utilities, WIMAX, WLAN, EVDO, UMTS, LTE, and HDTV.

Operating Modes:

Conventional, Time Domain & Statistcal

Specifications

• Measurement Type: Thru-Line Power
• Frequency Range: 350 MHz to 6 GHz
• Frequency Measurement Accuracy: +/- 3 MHz with CW signals
• Power Measurement Range: 0.25 W to 500 W average
  Average Power Rating limited by Chart below
• Insertion Loss: 0.05 dB (max)
• Insertion VSWR: 1.065 350 - 2000 MHz (max)
  1.12, 2000 - 6000 MHz
• Sample Rate: 44 M Samples/s Max
• Time Resolution: 50nSec to 10 Sec
• Time Base Accuracy: .01%
• Points Per Screen: 1001
• Trigger Input Connector BNC female (1MΩ Impedance; 3V High, 1.2V Low)
• RF Connectors: N-Type Female
• Factory Calibration: NIST Traceable
• Data Logging: with the VPM3, Virtual Power Meter Software
• Interface: USB 2.0 Type B (USBTMC)
• Power Supply: USB Port
• Compliance: CE, RoHS

Included with unit: User Manual, USB Cable, Trigger Cable, Virtual Power Meter (VPM3) Software/Manual